Auger sampler PS 05 electric 230V 1.4571 (AISI 316Ti)

Auger sampler type PS 05 Similar to the enclosed project sketch, for sampling from a downpipe, bunker, silo, chute or similar. The sampler is switched to discard immediately before sampling in order to expel the material in the pipe at the end of the pipe. The material that now flows in is conveyed to the sample outlet by changing the direction of rotation of the screw. The sample quantity can be determined by the length of the screw's running time. The screw tube Ø 60.3 mm and the screw are made of stainless steel 1.4571. The auger spirals are completely welded on both sides of the auger shaft. The screw tube length is approx. 448 mm up to the middle of the sample outlet. The sample opening is designed as a gap ø15mmx150mm, other sizes are possible. The position of the auger sampler in the mounting spout is infinitely adjustable. The auger is driven by a two-phase worm gear motor 230 Volt, 50 Hz., 0.18 kW, n = 35 min -1, protection class IP 65, insulation class B. A connection for a 1 or 2 ltr. plastic sample bottle is provided at the sample outlet. The scope of delivery includes 1 mounting flange with weld-on socket made of stainless steel 1.4571. Including 2L plastic sample bottle. All parts made of 1.4571 are pickled and passivated.